48-Port 10/100 PoE Stackable Managed Switch CISCO SF550X-48MP-K9-EU
- GIÁ LUÔN TỐT NHẤT
Cam kết giá tốt nhất cho Khách hàng - BẢO HÀNH
Cam kết bảo hành chính hãng - CHÍNH SÁCH ĐỔI TRẢ
Đổi trả dễ dàng những sản phẩm bị lỗi - GIAO HÀNG ĐẢM BẢO
Giao hàng tận nơi
Địa chỉ: 20/50 Đường số 5, Phường Bình Hưng Hòa, Thành phố Hồ Chí Minh, Việt Nam
Hotline: (028)62.677.398
Kỹ thuật: 0909.605.998
Bảo hành: 0901.387.998
Sale 1: 0936.387.998
Sale 2: 0902.438.747
Email: info@vienthongvina.net
Website: https://vienthongvina.net
- Thông tin sản phẩm
- Hướng dẫn thanh toán
- Chính sách vận chuyển
- Quy định đổi trả
48-Port 10/100 PoE Stackable Managed Switch CISCO SF550X-48MP-K9-EU
- 48 x 10/100 PoE+ ports with 740W power budget + 4 x 10 Gigabit Ethernet (2 x 10GBase-T/SFP+ combo + 2 x SFP+).
- Performance: Switching capacity 89.6 Gbps, Forwarding rate 66.66 mpps wire-speed performance.
- Layer 2: Port grouping up to 32 groups, up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation.
- Layer 3: IPv4 routing Wirespeed routing of IPv4 packets up to 7K static routes and up to 256 IPv6 interfaces, Classless Interdomain Routing (CIDR) Support for CIDR.
- PoE: Power Dedicated to PoE: 740 W, Number of Ports That Support PoE: 48 (16 support 60W PoE).
- QoS (Quality of Service): Priority levels 8 hardware queues, Scheduling Strict priority and weighted round-robin (WRR) Queue assignment based on DSCP and class of service (802.1p/CoS).
Đặc tính kỹ thuật
| Model | SF550X-48MP-K9-EU |
| Performance | |
| Switching capacity and forwarding rate | Capacity in Millions of Packets per Second (mpps) (64-byte packets): 66.66 |
| All switches are wire speed and nonblocking | Switching Capacity in Gigabits per Second (Gbps): 89.6 |
| Total System Ports | 48 FE + 4 10GE |
| RJ-45 Ports | 48 FE |
| Up link port | 2 10GE copper/SFP+ combo + 2 SFP+ |
| Jumbo frames | Frame sizes up to 9K bytes. The default MTU is 2K |
| MAC table | 16K addresses |
| Layer 2 Switching | |
| Spanning Tree Protocol | Standard 802.1d Spanning Tree support Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default 8 instances are supported Multiple Spanning Tree instances using 802.1s (MSTP) |
| Port grouping | Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP): Up to 32 groups, Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation |
| VLAN | Support for up to 4096 VLANs simultaneously Port-based and 802.1Q tag-based VLANs MAC-based VLAN Management VLAN Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks Guest VLAN Unauthenticated VLAN Dynamic VLAN assignment via RADIUS server along with 802.1x client authentication CPE VLAN |
| Voice VLAN | Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS Auto voice capabilities deliver networkwide zero-touch deployment of voice endpoints and call control devices |
| Multicast TV VLAN | Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs (also known as MVR) |
| Q-in-Q VLAN | VLANs transparently cross a service provider network while isolating traffic among customers |
| Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) | Protocols for automatically propagating and configuring VLANs in a bridged domain |
| Unidirectional Link Detection (UDLD) | UDLD monitors physical connection to detect unidirectional links caused by incorrect wiring or cable/port faults to prevent forwarding loops and blackholing of traffic in switched networks |
| Dynamic Host Configuration Protocol (DHCP) Relay at Layer 2 | Relay of DHCP traffic to DHCP server in different VLAN; works with DHCP Option 82 |
| Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping | IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 4K multicast groups (source-specific multicasting is also supported) |
| IGMP Querier | IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router |
| Head-Of-Line (HOL) blocking | HOL blocking prevention |
| Loopback Detection | Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP |
| Layer 3 | |
| IPv4 routing | Wirespeed routing of IPv4 packets Up to 7K routes and up to 256 IP interfaces |
| Wirespeed IPv6 static routing | Up to 7K routes and up to 256 IPv6 interfaces |
| Layer 3 interface | Configuration of Layer 3 interface on physical port, LAG, VLAN interface, or loopback interface |
| CIDR | Support for classless interdomain routing |
| RIP v2 | Support for Routing Information Protocol version 2 for dynamic routing |
| VRRP | Virtual Router Redundancy Protocol (VRRP) delivers improved availability in a Layer 3 network by providing redundancy of the default gateway servicing hosts on the network. VRRP versions 2 and 3 are supported. Up to 255 virtual routers are supported |
| Policy-based routing (PBR) | Flexible routing control to direct packets to different next hop based on IPv4 or IPv6 ACL |
| DHCP server | Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes. Support for DHCP options |
| DHCP relay at Layer 3 | Relay of DHCP traffic across IP domains |
| User Datagram Protocol (UDP) relay | Relay of broadcast information across Layer 3 domains for application discovery or relaying of BOOTP/DHCP packets |
| Security | |
| SSH | SSH is a secure replacement for Telnet traffic. SCP also uses SSH. SSH versions 1 and 2 are supported. |
| SSL | Secure Sockets Layer (SSL) encrypts all HTTPS traffic, allowing secure access to the browser-based management GUI in the switch. |
| IEEE 802.1X (authenticator role) | RADIUS authentication and accounting, MD5 hash, guest VLAN, unauthenticated VLAN, single/multiple host mode, and single/multiple sessions. Supports time-based 802.1X dynamic VLAN assignment. |
| Web-based authentication | Web-based authentication provides network admission control through web browser to any host devices and operating systems. |
| STP BPDU Guard | A security mechanism to protect the networks from invalid configurations. A port enabled for Bridge Protocol Data Unit (BPDU) Guard is shut down if a BPDU message is received on that port. This avoids accidental topology loops. |
| STP Root Guard | This prevents edge devices not in the network administrator’s control from becoming Spanning Tree Protocol root nodes. |
| DHCP snooping | Filters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. This prevents rogue devices from behaving as a DHCP server. |
| IP Source Guard (IPSG) | When IP Source Guard is enabled at a port, the switch filters out IP packets received from the port if the source IP addresses of the packets have not been statically configured or dynamically learned from DHCP snooping. This prevents IP address spoofing. |
| Dynamic ARP Inspection (DAI) | The switch discards ARP packets from a port if there are no static or dynamic IP/MAC bindings or if there is a discrepancy between the source or destination address in the ARP packet. This prevents man-in-the-middle attacks. |
| IP/MAC/Port Binding (IPMB) | The preceding features (DHCP Snooping, IP Source Guard, and Dynamic ARP Inspection) work together to prevent DoS attacks in the network, thereby increasing network availability. |
| Secure Core Technology (SCT) | Makes sure that the switch will receive and process management and protocol traffic no matter how much traffic is received. |
| Secure Sensitive Data (SSD) | A mechanism to manage sensitive data (such as passwords, keys, and so on) securely on the switch, populating this data to other devices, and secure autoconfig. Access to view the sensitive data as plaintext or encrypted is provided according to the user-configured access level and the access method of the user. |
| Private VLAN | Private VLAN provides security and isolation between switch ports, which helps ensure that users cannot snoop on other users’ traffic; supports multiple uplinks. |
| Port security | Ability to lock source MAC addresses to ports and limit the number of learned MAC addresses. |
| RADIUS/TACACS+ | Supports RADIUS and TACACS authentication. Switch functions as a client. |
| RADIUS accounting | The RADIUS accounting functions allow data to be sent at the start and end of services, indicating the amount of resources (such as time, packets, bytes, and so on) used during the session. |
| Storm control | Broadcast, multicast, and unknown unicast. |
| DoS prevention | Denial-of-service (DoS) attack prevention. |
| Multiple user privilege levels in CLI | Level 1, 7, and 15 privilege levels. |
| ACLs | Support for up to 2K entries on SG550XG models. Support for up to 3K entries on all other models. Drop or rate limit based on source and destination MAC, VLAN ID or IP address, protocol, port, DSCP/IP precedence, TCP/User Datagram Protocol (UDP) source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, Internet Group Management Protocol (IGMP) packets, TCP flag; ACL can be applied on both ingress and egress sides. Time-based ACLs supported. |
| Quality of Service | |
| Priority levels | 8 hardware queues |
| Scheduling | Strict priority and Weighted Round-Robin (WRR)Queue assignment based on DSCP and class of service (802.1p/CoS) |
| Class of service | Port based; 802.1p VLAN priority based; IPv4/v6 IP precedence/Type of Service (ToS)/DSCP based; Differentiated Services (DiffServ); classification and remarking ACLs, trusted QoS |
| Rate limiting | Ingress policer; egress shaping and rate control; per VLAN, per port, and flow based |
| Congestion avoidance | A TCP congestion avoidance algorithm is required to minimize and prevent global TCP loss synchronization. |
| Power over Ethernet (PoE) | |
| PoE | The following switches support 802.3at PoE+, 802.3af PoE, and Cisco prestandard (legacy) PoE on any of the RJ45 network ports. 60W PoE is also supported on selected RJ-45 network ports Maximum power of 60W is delivered to any of the 60W PoE ports, and maximum power of 30W is delivered to any of the other RJ45 network ports, until the PoE budget for the switch is reached The total power available for PoE per switch is as follows |
| Power Dedicated to PoE | 740 W |
| Number of Ports That Support PoE | 48 (16 support 60W PoE) |
| Environmental | |
| Dimensions | 440 x 44 x 350 mm |
| Weight | 5.16 kg |
- Bảo hành: 12 tháng.
1. PHƯƠNG THỨC GIAO HÀNG - TRẢ TIỀN MẶT
Phương thức Giao hàng - Trả tiền mặt chỉ áp dụng đối với những khu vực chúng tôi hỗ trợ giao nhận miễn phí (tham khảo thêm chính sách vận chuyển) hoặc trả tiền mua hàng trực tiếp tại văn phòng công ty.
2. PHƯƠNG THỨC THANH TOÁN TRƯỚC:
Chuyển tiền, chuyển khoản, thanh toán trực tiếp bằng tiền mặt hoặc qua thẻ.
Áp dụng cho khách hàng ngoài khu vực hỗ trợ giao nhận miễn phí và khách hàng có nhu cầu sử dụng phương thức thanh toán này.
Thông tin tài khoản Công ty TNHH Công Nghệ Viễn Thông Vina
TK ngân hàng: 0441000737085 NGÂN HÀNG VIETCOMBANK CHI NHÁNH TÂN BÌNH
Lưu ý:
- Bất kỳ tài khoản nào không được cập nhật ở trên đều không có giá trị thanh toán.
* Để phản ánh về chất lượng dịch vụ quý khách vui lòng liên hệ: Mr San 0903.948.914
Cám ơn Quý khách đã quan tâm, chọn mua sản phẩm và dịch của CÔNG TY TNHH CÔNG NGHỆ VIỄN THÔNG VINA.
vienthongvina.net UY TÍN - TẬN TÂM
Chính sách vận chuyển
VIỄN THÔNG VINA GIAO HÀNG TẬN NƠI VÀ CHUYỂN PHÁT TOÀN QUỐC
Đối với khách hàng ở khu vực Tp.Hồ Chí Minh:
- Giao hàng tận nơi, miễn phí tiền ship
Đối với khách hàng không ở khu vực Tp.Hồ Chí Minh:
- Khách hàng vui lòng tìm hiểu kĩ về sản phẩm mình định đặt hàng. Sau đó chuyển tiền trước cho chúng tôi qua tài khoản ngân hàng (cước phí chuyển phát nhanh chúng tôi sẽ để quý khách thanh toán, một số trường hợp chúng tôi sẽ hỗ trợ vận chuyển miễn phí) .
Sau khi tiếp nhận đơn hàng, nhân viên giao hàng vienthongvina.net sẽ giao hàng đến địa chỉ do khách hàng cung cấp. Tại thời điểm giao hàng, khách hàng kiểm tra đơn hàng theo hóa đơn (số lượng, số tiền). Khách hàng vui lòng thanh toán bằng tiền mặt hoặc chuyển khoản. Việc giao hàng kết thúc khi khách hàng xác nhận đủ đơn hàng.
- Quý khách lưu ý khi chuyển khoản vui lòng điền tên và nội dung mặt hàng cần mua để chúng tôi có thể xử lý đơn hàng được nhanh nhất.
- Sau khi chuyển khoản xong quý khách nhắn tin, gọi điện đến số Hotline 0909.605.998 hoặc gửi mail tới info@vienthongvina.net để thông báo và cung cấp đầy đủ thông tin số điện thoại, địa chỉ người nhận hàng để chúng tôi có có thể gửi hàng cho quý khách được nhanh nhất.
- Sau đó chúng tôi sẽ có trách nhiệm chuyển hàng cho quý khách qua các dịch vụ chuyển phát nhanh uy tín như: EMS, Tín thành, viettel, 247,...
- Thời gian nhận hàng của quý khách từ 24h-48h tùy từng khu vực.
* Lưu ý:
- Thời gian giao hàng có thể nhanh hơn hoặc lâu hơn với dự kiến vì lý do thời tiết, đơn hàng tại cửa hàng hiện quá tải, địa chỉ do khách hàng cung cấp bị nhầm lẫn với các địa chỉ khác. Lúc này, vienthongvina.net sẽ thông báo cụ thể đến khách hàng ngay khi phát sinh sự kiện gây chậm trễ việc giao hàng.
- Trường hợp khách hàng thay đổi địa chỉ hoặc yêu cầu điều chỉnh đơn hàng chỉ được thực hiện trong vòng 15 phút từ khi xác nhận đơn hàng và địa chỉ giao hàng.
- Việc điều chỉnh đơn hàng sẽ không được chấp nhận nếu khách hàng thông báo điều chỉnh sau 15 phút kể từ khi đơn hàng đã được vienthongvina.net tiếp nhận.
- Dịch vụ giao hàng tận nơi được thực hiện từ 10h30 sáng tới 08h30 tối tất cả các ngày trong tuần.
* Để phản ánh về chất lượng dịch vụ quý khách vui lòng liên hệ: 0909.605.998
Cám ơn Quý khách đã quan tâm, chọn mua sản phẩm và dịch của CÔNG TY TNHH CÔNG NGHỆ VIỄN THÔNG VINA
CHÍNH SÁCH ĐỔI/TRẢ HÀNG
CÔNG TY TNHH CÔNG NGHỆ VIỄN THÔNG VINA thực hiện đổi hàng, trả hàng và hoàn tiền cho Quý khách trong những trường hợp sau:
- Hàng hoá không đúng chủng loại, mẫu mã như Quý khách đặt hàng.
- Hàng hoá không đủ số lượng, không đủ bộ như trong đơn hàng.
- Hàng hoá bị móp méo, bể vỡ xảy ra trong quá trình vận chuyển giao hàng…
- Hàng hoá không đạt chất lượng do lỗi kỹ thuật của nhà sản xuất.
Điều kiện đổi/trả hàng: Hàng hóa đổi/trả phải còn nguyên vẹn, đầy đủ linh phụ kiện, bao bì, hóa đơn chứng từ…và làm thủ tục thu hồi hóa đơn VAT, hàng hóa theo đúng quy định.
LƯU Ý:
- Quý khách vui lòng kiểm tra hàng hóa và ký nhận tình trạng với Nhân viên giao hàng ngay khi nhận được hàng. Khi phát hiện một trong các trường hợp trên, Quý khách có thể trao đổi trực tiếp với Nhân viên giao hàng hoặc phản hồi cho chúng tôi trong vòng 24h theo số điện thoại 028-62-677-398 hoặc email: info@vienthongvina.net
- Việc đổi/trả hàng, sửa chữa sẽ được thực hiện theo đúng quy định của nhà cung cấp, nhà sản xuất, hoặc nhà bảo hành được ủy quyền của nhà cung cấp, nhà sản xuất đó.
- Quy trình xử lý thủ tục đổi hoặc trả hàng được thực hiện trong vòng hai tuần tính từ ngày nhận đủ thông tin và chứng từ từ khách hàng.
CÔNG TY TNHH CÔNG NGHỆ VIỄN THÔNG VINA không chấp nhận đổi/trả hàng khi:
- Quý khách muốn thay đổi chủng loại, mẫu mã nhưng không thông báo và thỏa thuận trước.
- Quý khách tự làm rách hoặc thiếu mất bao bì, trầy xước, móp méo, bể vỡ, thiếu mất linh phụ kiện…
- Quý khách vận hành không đúng chỉ dẫn gây hư hỏng hàng hóa.
- Quý khách không thực hiện đúng các quy định theo yêu cầu để được hưởng chế độ bảo hành.
- Quý khách đã kiểm tra và ký nhận tình trạng hàng hóa nhưng không có phản hồi trong vòng 24h kể từ lúc ký nhận hàng.
- Hàng hóa không có đầy đủ các chứng từ kèm theo như: Hóa đơn mua hàng, Phiếu bảo hành…
Cám ơn Quý khách đã quan tâm, chọn mua sản phẩm và dịch của CÔNG TY TNHH CÔNG NGHỆ VIỄN THÔNG VINA.
Hỗ trợ trực tuyến
- Đánh giá SP
- Cảm nhận KH trên Facebook

